● Flow rate: 600-25000m3/hr
● Head H(m): 20-85
● Speed: 180-900rpm
● Efficiency: Max. 60-87%
● Materials:Cr26A
Introduction:
1. WN dredging pump is adopted front-disassembly structure in favor of disassembly and maintenance. Also it is equipped with special disassembly tools for each different parts according to each parts' characters.
2.The standard trapezoidal quadruple thread is adopted to connect the impeller and shaft which not only transmits strong torque but also is easy to disassemble. Meanwhile there is a disassembly impeller ring in the shaft sleeve in favor of disassembling impeller.
Specifications:
Type |
Capacity (m³/h) |
Head (m) |
Speed (r/min) |
Efficiency (%) |
NPSHr (mm) |
Inlet Diameter (mm) |
Outlet Diameter (mm) |
Max.Diameter of Flowd Particle (mm) |
200WND | 600-800 | 20-40 | 700-900 | 60-65 | <4.5 | 250 | 200 | 178 |
200WN | 750-1000 | 40-65 | 700-850 | 70-72 | <4 | 250 | 200 | 180 |
250WND | 950-1100 | 20-40 | 500-700 | 65-70 | <4 | 300 | 250 | 220 |
250WN | 1100-1300 | 40-65 | 500-650 | 70-74 | <4 | 350 | 250 | 144 |
300WND | 1500-1800 | 20-40 | 400-600 | 65-68 | <4 | 350 | 300 | 241 |
300WN | 1800-2200 | 40-65 | 400-550 | 74-78 | <4 | 450 | 300 | 241 |
350WN | 2600-3000 | 40-65 | 400-550 | 74-78 | <4.5 | 450 | 350 | 245 |
400WN | 2800-3200 | 20-40 | 400-550 | 74-78 | <4.5 | 450 | 400 | 250 |
450WN | 3200-3850 | 40-67 | 350-500 | 76-80 | <4.5 | 600 | 450 | 354 |
500WND | 3600-4200 | 20-40 | 220-320 | 72-75 | <4.8 | 600 | 500 | 330 |
500WN | 4500-5500 | 40-65 | 350-450 | 78-80 | <4.8 | 650 | 500 | 250 |
600WN | 5000-9000 | 55-80 | 280-420 | 81-85 | <6 | 660 | 600 | 220 |
700WN | 8200-12000 | 60-85 | 280-380 | 83-85 | <6 | 760 | 700 | 280 |
900WN | 12000-19000 | 50-75 | 280-330 | 85-87 | <6 | 960 | 900 | 320 |
1000WN | 16000-25000 | 23-76 | 181-290 | 85-87 | <6 | 1200 | 1000 | 350 |
Construction of SH Slurry Pumps:
